Odie's Wax
* Food safe, solvent free, non-toxic wood finish and stabilizer.
* Can be used alone or in conjunction with any other Odie's finish.
* Easy to use.
* Waterproofs.
* Use on lighter woods or any wood where only minimal color change with added depth is desired.
* Works well with a buffer or polisher.
Highest quality, high concentrate, super hard wax for Wood. Odie's Wax is a fantastic top coat over any other Odie's finish, or can be used as a stand alone finish too! Great for new wood and suitable for use as a re-conditioner for old wood. For extraordinary results, use over original Odie’s Oil, Super Duper Oil, or Super Penetrating Oil when working with wet woods.
Like the original Odie’s Oil, Odie's Wax is a proprietary blend of oils and waxes, born out of inspiration, hard work and a driving need to solve problems specific to the woodworker. The culmination of 30 years of research, development, and field testings in the most extreme environments produced a revolutionary product that out-performs and out-covers the competition.
Odie's Wax is great for interior and exterior applications: interior and exterior wood, boats, Bbightwork, doors, floors, decks, gates, fine furniture, patio furniture, bowls, cutting boards, kitchen Iiplements, toys, etc. The list goes on and on!
* Odie's Wax is great for wood turners and can be used as a friction polish!
* Contains natural UV inhibitors. Sunscreen for your wood!
* Odie's Wax does not contain driers or any toxic chemicals, and all ingredients are food safe. No worries! Odie’s Wax is safe for everybody: families, kids, and pets!
Odie's Wax is easy to use! No sanding or stripping in between coats or for retouching! Wipe on, wait a while, buff off. Easy! Most surfaces can be used within 24 hours and can be exposed to liquids within 3-5 days.
A LITTLE ODIE'S WAX GOES A LONG, LONG WAY! USE SPARINGLY. "No solvents" means there is almost nothing to evaporate, so what you put on the wood, stays in the wood. Truly economical, Odie's Wax covers many, many times the average of conventional finishes.¹
It is easy to use! Click here for application instructions.
Odie's Wood Butter is made by hand in small batches to insure quality. It is made in the USA.
¹ Coverage will vary depending on wood density and porosity, or the non-wood surface it is being used on.
WARNING! OIL SOAKED RAGS CAN SPONTANEOUSLY COMBUST. DISPOSE USED RAGS IN A SEALED CONTAINER.
Odie's Wax
General Application Instructions
- Stir or mix your jar well as ingredients may settle over time.
- Tools needed: A non-woven pad (rated above the grit or micron the piece has been sanded to) / A Clean Cotton Terry Cloth Towel.
- Use the non-woven pad to work the product into your project surface. The friction from the application helps drive the product to the surface. Remember: A little Odie’s goes a long way, so don’t overdo it!
- After working the product into the surface with the pad, allow it to set for 10 minutes to 3 hours (depending on the product used and surface applied to). You can wait, but your buff/wipe off may be a bit tougher. Do not allow the product to set for more than 12 hours! This will require a re-application to re-activate the finish for a proper buff/wipe off.
- After waiting for the product to set up, take a clean terry (100% cotton) cloth towel and proceed to BUFF/WIPE OFF ALL the product from your project surface. When your towel has loaded up with product, switch to a new clean terry cloth towel until the entire surface is buffed off clean and NO product REMAINS. If you can swipe a clean finger across the surface and make no mark you are done.
- Cure time for Odie's Universal and Super Duper light oil: most surfaces can be used within 24 hours and can be exposed to liquids within 3 to 5 days.
- Cure time for the rest of our finishes: your piece can be handled almost immediately after buffing however, we suggest you give it a day or two to further the cure before any use. If you know the piece is going to be exposed to water or liquids, we suggest you give it 5 days of cure time for best results. On exterior decks, 4-5 days of dry weather is all that is required.
- Additional coats of Odie’s products can be applied using these same easy steps above. We suggest waiting 24 hours in between coats.
- For Epoxy/Resin projects we recommend using less oil than on wood - follow the same application process.
- For Super Duper Oil and Super Duper Dark Oil wipe, brush, roll or spray on and work into the surface when possible. Be sure to wipe away any excess oil that remains on the surface. Formulated for wood, stone & concrete, clay & brick, metal, plastic.
- For concrete, leather, or metal application- don't let the oil sit, BUFF OFF immediately.
- When applying to concrete, the initial cure is much quicker - in most cases, the surface can be used within 8 hours.
- For repairs or a maintenance re-coat, 10 hours of cure time is sufficient before use.
- We don't recommend our Dark finishes for exterior use, all the rest of Odie's products are excellent for both interior and exterior use.
For additional information, please visist the FAQ.
